EMERGENCY LIGHTING TESTING COURSE – CPPFES2026 INSPECT AND TEST EMERGENCY LIGHTING AND EXIT SIGN SYSTEMS

PRE-REQUISITES (ACADEMIC AND COURSE)

It is recommended that you provide the following:

1. Working pen and highlighters for use on the course.
2. An active and working email account – is required to complete your online personal study component.
3. A photo ID is required to confirm your identity on your training day. 
4. Participants must wear safety work boots for this course. (REQUIRED)

COURSE ELIGIBILITY CRITERIA

The CPPFES2026 unit does not have any required eligibility criteria. You can view the unit’s criteria on www.training.gov.au.

Participants should have basic Language, Literacy and Numeracy skills to level 2 (ACSF 2).

It is recommended that participants be at least 17 years of age.

RECOMMENDATIONS.

Before enrolling in this emergency lighting testing course, you may want to check out the student administration section of this website for the terms and conditions you are bound by when you enrol in one of our courses. The information within this section will highlight any expectations we will have from you and provide you with a clear understanding of your required commitment to your enrolled course. To access the student administration portal, simply click here: Student Administration.

To access your enrolment forms terms and conditions, simply click here: Enrolment Terms and Conditions.

The training offered by Intelligent Training Solutions provides the skills and knowledge to inspect, test and, when appropriate, service emergency lighting and exit signs and systems at a client’s location but does not certify you to perform the duties of a qualified electrical contractor (example: to replace or install hard-wired units). Intelligent Training Solutions accepts no responsibility for the subsequent actions of participants.

Emergency lighting systems and exit sign servicing involve moderate physical activity, including kneeling, bending, reaching, and working at heights. Intelligent Training Solutions does not accept any liability for any harm suffered by you as a result of your participation in the course. If you have any special needs (including those concerning Language, Literacy or Numeracy), a related disability or condition, or any other concerns, you should raise these before enrolment.

Even though training to become a service technician is a serious matter, we pride ourselves on our energic, practical and engaging format that simulates real working scenarios. Our courses contain a lot of valuable content to ensure participants remain engaged rather than listening to war stories of the trainer’s past experiences. Our instructors are qualified A-Grade Electricians or maintenance personnel working under the guidance of our in-house A-Grade Electrician. There are many topics within this emergency lighting testing course. For a full list of the information taught and assessed, we recommend viewing the CPPFES2026 criteria upon which our course is based.

VIEW: CPPFES2026 Unit of Competency

As an overview, the following topics are taught and assessed throughout this emergency lighting testing course. Please note that the list below is not extensive, as previously mentioned, we recommend reviewing the CPPFES2026 criteria by using the link above should you wish to review the specific subject matter you will be taught.

• Introduction in the Industry
• Workplace Safety
• Obtaining work permits, hazard identification, Safe Work Method Statements, etc…
• Inspect, Test and Maintain Emergency Lighting Systems and Exit Lights
• General Maintenance on fittings
• Servicing Operations
• Report writing and record maintenance
• Relevant Code of Practice, Standards, and Guides

The Enrolment Fee for this course is $650 per person.

The Australian Standards do not state a requirement to renew or refresh this accreditation; therefore, you will need to refer to your workplace requirements for training. Many workplaces—especially those in high-risk industries—have ongoing policies to ensure their staff remain competent in performing the six-monthly inspection, testing, and maintenance of emergency lighting and exit sign systems. To support compliance with workplace requirements and maintain best practices, we recommend a refresher course every three years to keep your skills up to date.

Once you have completed your enrolment form and it has been successfully submitted and received by our office, the following process is applied:

STEP 1)

You will receive a confirmation text message (SMS) from our office informing you that we have received your enrolment form.
NOTE: This text message may take between 1 to 12 hours to arrive as this message is only sent once our team have your enrolment form in their hands.

STEP 2)

During this phase in our enrolment process, you will receive anywhere between two or three emails from our enrolment (administration) team. These emails may include:

• A welcome letter which contains information about your course, together with your trainer’s contact details, the location your training will take place, the time your training will commence and any other important information that is relevant to your course.
  
• A tax invoice and/or receipt; and finally
  
• An email containing information on your USI

NOTE: It may take anywhere between 1 – 24 hours for our emails to arrive in your inbox during this stage. Please remember to check the spam or junk folders.

STEP 3)

During the third and final step in our enrolment process, you receive a final text message (SMS) from our enrolment (administration) team. This text message will confirm that your enrolment has been processed by our team and will list any or all emails that we have sent you.

IMPORTANT NOTE: IF YOU DO NOT RECEIVE THE EMAILS MENTIONED IN YOUR FINAL TEXT MESSAGE, YOU MUST CONTACT OUR OFFICE.

Student support is a cornerstone of our organisation. Whether you are a full-time, part-time or blended delivery student, you will always have access to your course trainers or student support officers. How you engage in our services (daily, once a week or in blocks) is up to you.

Intelligent Training Solutions can provide you with scheduled or flexible student support sessions. Support for this course is available in the following formats and times:

PLEASE NOTE: Responses to email support requests will occur during the times stated above; however, responses may be delayed up to 24 hours. If your support enquiry is urgent, we recommend calling us.

Once you have successfully completed the requirements of this course, you will receive the following items as part of your certification:

1. A PDF VOC (Verification of Competence) wallet-sized card 
2. A Certificate of Completion – Statement of Attainment
3. A printed Learner Guide 

We will also add you to our register to receive FREE reminders that your certification may be due for refresher training. This is a free service offered by Intelligent Training Solutions to assist you in staying up-to-date and current with your certification.

Intelligent Training Solutions started as a workplace training organisation, delivering courses directly to clients at their own locations throughout Australia. Today onsite course delivery remains a strength of ours when it comes to helping businesses, large or small, find solutions to their own compliance or employment and training needs.

In Victoria, Intelligent Training Solutions Training Centre operates from Warehouse (Unit) 74, 2 Cobham Street, Reservoir, Victoria 3073.

1. Reservoir (ITS Training Centre) – Unit 74, 2 Cobham Street, Reservoir, Victoria 3073
2. On-Site delivery in all other states 

This course and the unit of competency that make up your Statement of Attainment must be assessed both theoretically and practically in accordance with the criteria of the course. The assessment will be based on competency-based training (CBT) principles. A successful outcome for this certificate will be determined by a range of different methods, including:

• Either (one or the other) an online or written submission of work
• Observation of simulated and practical activities
• Structured questioning or discussions.

Participants wishing to continue with their study after achieving the CPPFES2026 certification can do so by undertaking the Certificate II in Fire Protection Inspection and Testing Course. Unfortunately, Intelligent Training Solutions is not offering the Certificate II course, so you may need to Google a training provider who is offering the course. 

EMPLOYMENT PATHWAY

Participants who successfully complete this course will be able to inspect and test the functional operation of emergency and exit lighting systems installed at their own workplace or at a client’s premises. This unit does not cover installation, replacement (unless plug and play), maintenance or repair functions restricted to licensed trades or occupations.

Recognition of prior learning for this certificate will be offered by way of assessment only. Applicants will need to undertake the theory and practical assessment tasks to be deemed competent in this course.

Standard fees will apply. Further information is available by contacting our office.

• You have the right to complain about the performance of our administration services, trainers or assessors.
• You have the right to appeal the assessment decision made by our trainers. Please refer to our appeals policy in this website’s student administration section.
• You can view our complaints and appeals policies by visiting the student administration section of this website.

Intelligent Training Solutions will provide you with all the required resources, textbooks, and industry codes via your Learner Portal. It is strongly recommended that you purchase a copy of the AS-NZS 2293.1-2018,  AS-NZS 2293.2-2019, AS-NZS 2293.3-2018 standards after completing this course. You will not require these documents for your course as copies of these standards will be available to you for review on the day of your course; however, it is recommended that after successful completion of your course, you obtain a copy of these standards for your own records. Australian Standards can be purchased from SAI Global and are licensed to the purchaser.   

Once you have completed and passed this course, you will be issued a Statement of Attainment within 30 days of your final successful assessment. Your Statement of Attainment will contain the following Nationally Recognised Unit of Competence:

• CPPFES2026 – Inspect and test emergency and exit lighting systems

PLEASE NOTE: Intelligent Training Solutions aims to issue certificates within 48 to 72 hours from the successful completion of your course; HOWEVER, failing to provide our office with your correct USI details, failing to complete your personal study component, or a failure to pay your invoice on time will delay this process.

If you require your certificate urgently for any reason, please inform your trainer on the day of your training session so that they can attempt to make the required arrangements for you.

We also have a general set of terms and conditions, which can be viewed here: ENROLMENT TERMS AND CONDITIONS.

To summarise our cancellation and refund terms and conditions, in short, We are unable to refund monies for students who do not turn up for class. Course fees will not be refunded if received within eight days of your course commencement. Intelligent Training Solutions has already secured the required trainers, training venues, course resources and printed materials for your attendance on the course. Your enrolment has been taken into account during this preparation stage; therefore, course fees WILL NOT be refunded.

Any student who enrols in a course less than eight days from the proposed course commencement date will not receive a refund in accordance with Clause 4.3.

PLEASE decide carefully when enrolling in a course with less than eight days between your enrolment and the commencement of the course. Intelligent Training Solutions does not have a cooling-off period for this course. Once your enrolment is processed, all payments made are non-refundable.

NOTE: WITHDRAWING FROM THE COURSE AT THIS STAGE WILL RESULT IN A VACANT POSITION WITHIN THE COURSE AND WILL DEPRIVE INTELLIGENT TRAINING SOLUTIONS AND THE COURSE OF THE REVENUE IT WOULD PROVIDE. 

Click the link above to view our full list of terms and conditions.

For those who are not confident with a computer, Intelligent Training Solutions may be able to arrange for you to attend our training centre before your course, where our staff can support you in completing your online personal study component using our computers and internet.

Please Note: We will always recommend you attempt to complete your personal study component online at home. Our team of trainers and administrators are available on our phones to support you in gaining access to your Learner Portal. 

The face-to-face training session is a fun, interactive, hands-on session that covers all the practical elements of the test and tag service technician. Information is presented to you in a conversational delivery approach, with lots of real-world scenarios, enhanced video, modern presentations and, most importantly, a direct focus on practical, easy-to-implement approaches and techniques.